Creating and configuring Virtual Machines for your project

With REVEN v2, you can build RE projects where analyzed scenarios are recorded from Virtual Machines(VMs), either VirtualBox or QEMU.

  • For most use cases, we recommend using QEMU VMs, to benefit from high-fidelity replays.
  • For specific use cases, you can use VirtualBox, such as when:
    • VM configuration and setup is a heavy job.
    • Some specific hardware must be studied.
    • The scenario does not reproduce when emulated in QEMU.

IMPORTANT NOTE: The VirtualBox replayer does not support VMs with more than 2048MB of RAM. Please do not record scenarios with more than this amount of RAM, or the replay will fail.

Records can be started from VM snapshots. The Project Manager allows some control over those snapshots. Here are some keys to understand what's happening.

Introducing VM snapshots

Both QEMU and VirtualBox VMs use two kinds of snapshots:

  • Disk snapshots: contain no more than the content of the machine local filesystem. Restoring a disk snapshot brings you to the VM boot, which might not be convenient when recording a scenario.
  • Live snapshots: contain the full saved state of a running VM, including the RAM, CPU state, and filesystem. Restoring a live snapshot brings you to the exact VM running state where you took it.

NOTE: In case of modifications in the VM hardware parameters, a live snapshot will probably become unrecoverable.

Please refer to the dedicated VirtualBox and QEMU pages for more information on how to work with each system's snapshots.

Disk snapshot statuses

Disk snapshots can have the following statuses in the Project Manager, relating to OSSI availability:

: Prepared, means the filesystem has been extracted from the snapshot.

: Inherited, means the snapshot "inherits" the OSSI of a parent snapshot. NOTE: If the current snapshot contains new binaries compared to its parent snapshot, OSSI may not be available for these binaries in the Analysis stage. Should you need this OSSI, launch a Prepare operation on the current snapshot.

: Not prepared, means no Prepare operation has occured for this snapshot. Therefore, no OSSI is available for this snapshot. Without OSSI, binary and symbol names will not be available in the Analysis stage.

Windows VM prepartion

On Windows systems, the following preparation steps are required to improve REVEN performance and to make all its features fully operational.

  • Disable desktop graphical effects.
  • Disable unnecessary services.
  • Disable KPTI protections (required to get OS Specific Information (OSSI) such as symbol names).
  • Disable the CompactOS option (required for performance and to get OSSI).

Optimizing the VM system for analysis

In order to optimize scenario recording and replay performance, you will need to remove system features that are not useful to your scenarios.

As REVEN will record the entire system execution, the following VM system configuration steps will optimize the virtual machine characteristics and scenario recordings:

  1. Limit the virtual machine RAM to reduce disk footprint.
  2. Disable any non essential system features so as to reduce noise in the scenario recording, hence the replay duration, the trace size and complexity, which makes analysis easier and faster.

Disabling unnecessary services

Using the provided Powershell script

Regarding Windows 10 VMs, the REVEN package comes with a sample Powershell script designed to lighten a Windows 10 system, so as to greatly improve its performance and reduce the size of REVEN traces. This script is available from the Downloads page of the Project Manager.

IMPORTANT: Please note that this script is provided to REVEN's users as-is, without any guarantee, as a convenient tool. Therefore, it must be considered for what it is - an example. It is strongly recommended to backup any VM before running the script on it. Besides, the script may require modifications to fit your specific configurations. For example, non-English VMs may require some translation in the script, such as administrator to administrateur in a French VM.

Before using the script, apply the following configuration:

  • Disable Windows Defender and optionally the firewall:
    • As an Administrator, launch gpedit.msc.
    • Navigate to "Local Computer Policy\Computer Configuration\Administrative Templates\Windows Components\Windows Defender\Turn off Windows Defender" and set the Enabled radio button.
    • Navigate to "Local Computer Policy\Computer Configuration\Windows Settings\Security Settings\Windows Firewall with Advanced Security" and set it to Off.

On Windows 10, in an administrator Powershell console, you can:

  • Get help about the script's capabilities and usage:
> Get-Help windows10_lightener.ps1
  • Run the script to disable a maximum of services:
> Set-ExecutionPolicy Unrestricted
> windows10_lightener.ps1 -All

IMPORTANT: AV disablement by this script is not persistent after a VM reboot, which is is why we recommended disabling it via groups policies above. Alternatively, the script may be executed after each reboot to disable the AV services again:

> Set-ExecutionPolicy Unrestricted
> windows10_lightener.ps1 -DisableAV

Manually disable the following services:

  • Print spooler
  • DPS
  • Themes
  • Workstation (SMB protocol)

In order to enable networking, reactivate the following services:

  • Windows Event Log

  • Network Connections

  • Network List Service

  • Run the script to disable basic services only:

> Set-ExecutionPolicy Unrestricted
> windows10_lightener.ps1 -Basic

Using the provided NTLite template

NTLite is a tool easing the process of customizing Windows. It can be used on either a running system, such as a VM, or on an installation ISO. The way the provided template is supposed to be used is on a live, running system.
You will need at least a NtLite Home license to modify your VM.

Please follow the instructions below during the "Lightening of the snapshot" step of the "VM setup" wizard:

  1. Install NTLite on the VM. You can transfer the NTLite setup file through the "file CDROM" feature.
  2. Activate your NTLite license on this VM.
  3. Load the current Windows installation into NTLite.
  4. Load the provided template by inserting the "Windows 10 lightener CDROM".
  5. Apply the changes required by the template. A few reboots may be required to fully apply all the modifications.
  6. You will be done when all the changes will have a green bullet in the "Apply" section of NTLite.

NOTE: Installing NTLite on the VM may require an active internet connection. Please refer to NTLite's documentation for more information about how to install NTLite.

Enable OSSI feature

See the Windows OSSI page on how to enable the feature.

Linux VM preparation

Optimizing the VM system for analysis

On Linux systems, common optimizations include:

  • Disabling Xorg server when not needed.
  • Disabling the console framebuffer if not needed. For example, on Debian systems, in file /etc/default/grub, add the line:
  • Disabling any unwanted background service.

Enable OSSI feature

See the Linux OSSI page on how to enable the feature.